P.O. Block 3056 Version 1.2 Black Mamba
The Brunny P.O. Blocks 3056 V1.2 are designed for skaters of all skill levels from beginner to expert shredder to send it. The P.O. Blocks 3056 V1.2 aim to get you stalling, sliding and grinding with confidence and security. The design of the P.O. Blocks 3056 V1.2 delivers a wide surface area for stability and control, smooth edges to eliminate wheel bite and a curvature to lock into the coping. Using the slickest material known to humankind, these blocks will have you sliding with ease, and sending it with steeze.
Oh Là là!
**Limited stock**
Sizing:
Check out our infographic to see which size best fits your plate and roller skate set up. If you are having trouble figuring out which size to order, don’t hesitate to get in touch with one of our snazzy team members through [email protected]
Coming with :
- A mounting bar set
- Allen key
- Wrench key 8
- 4 nuts
- 4 bolts
Compatibility :
To make sure you select the right size please refer to our size charts and measure the distance between your plate inner kingpin. It is up to you to make sure you select the correct size and we won't be able to refund or replace your order if the slide blocks doesn't fit your setup.
We are pleased to say the P.O. Blocks 3056 are compatible with 20degree plates, but you will need a bit of elbow grease to bend the end of the hanger to install it properly.
It's in the nature of steel to bend if there is a gap between your plate and the mounting bars. We definitely recommend using plates without gap such as the Sunlite plate to avoid the mounting bars to bend. Please pay attention when installing slide blocks on your skate as we are not responsible for the mounting bars to bend and can't offer replacement.
Please check plate compatibility before purchasing or skating your blocks. If the P.O. Blocks 3056 V1.2 are not right for your skates, we are not able to refund you if the blocks are not in their original condition.
⚠️ Do Not Use Labrys Trucks on the 253mm Magic Hex plate with XL slide blocks as the trucks will touch the slide blocks putting them under extreme pressure. It will damage the plate, the slide blocks and the trucks and we are not responsible for any damages with this combination setup. If you wish to skate XL slide blocks and HEX plate 253mm please use different trucks or modify the slide blocks, at your own risk, so it doesn't touch the trucks
Happy Shredding!!
P.O. Blocks 3056 installation instructions.